The Turbidity Analyser continuously monitors the ash concentration in the liquid sulfur after the filter.
一旦测量到偏差，就可以立即采取措施，最大限度地减少灰烬进入工艺的洁净场所。
It can measure in the low ppm levels and the system is designed to operate in the process conditions of liquid sulfur. It is pre-calibrated and implementation in the process is simple and easy.

Turbidity Analyser uses light in the near-infrared (NIR) range from 730 to 970 nm. A precisely defined, constant light beam penetrates the liquid sulfur. Light scattered from particles in the medium is detected by eight hermetically-sealed silicon photodiodes at an angle of 11°. Simultaneously, the unscattered light is detected by a reference photodiode. If sulfur turbidity reaches an unacceptable level, the flow can be automatically recirculated or switched off.

- 优质材料：适用于最苛刻的加工条件，包括高温。
- 实时监控灰分水平：操作员可控制产品透明度
- 测量范围低至 ppm：可测量 0-0.5 ppm 范围内的微粒
- 无需校准：测量可靠，运行高效
- 使用在线色度计：降低实验室和生产成本，消除人为错误，防止环境污染。

控制模块： 以文本或图形形式实时显示灰分浓度。测量单位为 ppm。该系统可提供 316SS 外壳和 19" 机架版本。它有 4-20mA 输出和 3 继电器输出，可用于报警。